There are moving parts inside the pumphead. Before opening the tool-
unlockable guard or tool-unlockable track, ensure that the following
safety directions are followed:
1.
Ensure the pump is isolated from the mains power.
2.
Ensure that there is no pressure in the pipeline.
3.
If a tube failure has occurred, ensure that any fluid in the
pumphead has been allowed to drain to a suitable vessel,
container or drain.
4.
Ensure that appropriate Personal Protective Equipment (PPE) is
worn.
Primary operator protection from rotating parts of the pump is
provided by the pumphead safeguard. Note that safeguards differ,
depending on the type of pumphead. See the pumphead section of the
manual.
14
m-530sn-en-07