Watson-Marlow 520DuN IP66/NEMA 4X User Manual
47
In the third screen of the Setup menu select
Outputs
using the
UP
and
DOWN
keys. Press
ENTER
to confirm your choice.
The pump displays a screen allowing you to configure each of the four outputs,
or to exit this menu. Use the
UP
and
DOWN
keys to choose and press
ENTER
to confirm your decision.
If
Output 1
is chosen, the pump displays the five options.
Selecting
General
or
Leak
using the
UP
and
DOWN
keys and confirming
the choice by pressing
ENTER
configures that option to Output 1, displays a
confirmation screen, and returns the user to the Output selection screen.
Selecting
Run/Stop, Direction
or
Auto/Man
using the
UP
and
DOWN
keys and confirming the choice by pressing
ENTER
displays screens allow-
ing the user to configure Run to
High
or
Low
, Clockwise to
High
or
Low
,
and Auto to
High
or
Low
respectively. Choose using the
UP
and
DOWN
keys and press
ENTER
to confirm. The option chosen is configured to
Output 1. The pump displays a confirmation screen, and returns the user to
the Output selection screen.
The user can configure
Output 2
,
Output 3
and
Output 4
in the same way, or
choose
Exit
.
If
STOP
is pressed during configuration, the previous setting for the output is
retained and the pump redisplays the Output selection screen.
If
Exit
is chosen, the pump returns the user to the third screen of the Setup
menu.
