10
Need help or have any questions? Call us at 1-714-963-0329 or send us an email at service@globalhobby.net
❑
Line up the two tail mounting screws in the vertical
tail with the two holes in the fuselage.
Step 5: Installing the Tail Assembly
❑
Remove the two hex nuts and two flat washers that
are preinstalled on the tail mounting screws.
❑
Carefully slide the horizontal tail into the slot in the
fuselage.
❑
Center the tail and push it forward completely.
Make sure the control horn is facing the bottom of
the fuselage.