9
For more cool and exciting Wattage products, visit our website at http://watt-age.globalhobby.com
❑
Carefully line up the two holes in the second wing
panel with the exposed ends of the wing joiners.
❑
Carefully push the two wing panels firmly together
as shown.
The wing panels should fit tightly together.
❑
Using scissors, cut the length of adhesive wing joiner
tape in half.
❑
Remove the tape's protective backing and apply one
strip of tape to the bottom of the wing joint and the other
strip to the top of the wing joint.
❑
Use scissors to trim the ends of the tape flush with
the wing.
The tape will keep the wing panels from pulling apart
during flight.