wattbike.com
| 0115 945 5450 | info@wattbike.com
@wattbike
facebook.com/wattbike
8.
Once all the race details are correct a race can start.
9.
To start a race click “START’, a count down to the Race start will begin on screen and also on
the WBM screens.
10.
After the count down has completed the riders can then start pedalling, if the rider’s pedal
before the count down has finished their ‘bike’ will cause a false start.
11.
All races should be conducted with a ‘Standing Start’ meaning there is no pedalling before the
timer has finished.
12.
If for any reason the race needs to be abandoned click STOP in the bottom right hand corner
to abort it.
During the Race
A screen similar shown in fig 8.5 will be displayed with the top ‘half’ of the screen dedicated to
the ‘Track’ and the bottom ‘half’ dedicated to the details of the race.
The bottom split portion of the display shows:
•
The Info Tab - Basic race information: distance, time, and the number of participants (fig 8.5)
•
The Ranking tab – What position the bikes are in at that point in the race (fig 8.6),
•
The Split tab - the split times and differences between the participants at predetermined
points in the race (fig 8.7).
fig 8.4
fig 8.5