background image

Page 11

IMPORTANT SAFETY INSTRUCTIONS

Read and observe the following safety points at all times.

NOTICE

For indoor use only. Internal components are not sealed from the environment. The device can only be used in a fixed location such 

as a telecommunication centre, or a dedicated computer room. When you install the device, ensure that the protective earthing 

connection of the socket-outlet is verified by a skilled person. Suitable for installation in Information Technology Rooms in accordance 

with Article 645 of the National Electrical Code and NFPA 75.
Only use brackets/attachments/accessories specified by the manufacturer. 
Do not place the device in an unstable position where it might fall and cause injuries. This equipment is not suitable for use in 

locations where children are likely to be present.
Do not cover this device with a cloth. Do not install it on a carpet or rug. 

CAUTION – Potential Injury

Do not use this product with extension cords, multioutlet power strips, multioutlet extenders, or UPS devices (other than a WattBox 

UPS). The power capacity of these accessories can be overloaded by this product and may result in a risk of fire, or property damage.

WARNING – Lithium Battery

A lithium battery is molded into this device’s real-time clock. The lithium battery is not intended to be replaced; a lithium battery 

can explode if it is incorrectly replaced. Do not recharge, disassemble, or incinerate a lithium battery. Discard used lithium batteries 

according to local regulations.

WARNING – Power Sources, Grounding, Polarization

This plug is designed to be inserted into a NEMA 5-15 (three-prong grounded) outlet only. Do not force the plug into an outlet that 

is not designed to accept it. Never dismantle the plug or to alter the power cord, and do not attempt to defeat the grounding feature 

by using a 3-to-2 prong adapter. If you have questions about grounding, consult your local power company or a qualified electrician.

Summary of Contents for WB-800VPS-IPVM-12

















Reviews: