background image

 

RECYCLING

Dispose  of  the  unit  in  hazardous  material-specific  recycling  locations  only  after  a 
complete  discharge  (if  possible).  Batteries  are  hazardous  chemicals.  Strictly  follow 
your local regulations regarding battery disposal and recycling. Dispose of the unit 
immediately if it cannot be powered on after over-discharging.
Always return your used electronic products, batteries, and packaging materials to 
dedicated collection points to prevent uncontrolled waste disposal and promote the 
recycling of materials.

www.wattbricks.com 

14

CLEANING

•Only  clean  the  surface  of  the  unit  using  a  dry,  non-abrasive  cloth.  You  can  use  cleaners 
designed for mobile phones or computer screens. To ensure adequate cooling, vacuum the fan 
vents to remove dust and debris.

 

TRANSPORTATION AND STORAGE

• Battery life may be reduced if not used for an extended period of time. Discharge the Power 

Station to 30% battery life, then charge to 85% every 3 month to prolong battery life.

• DO NOT place the product near a heat source, such as a car in direct sunlight, a fire source, 

or a heating stove.

• Store the product in a dry environment. DO NOT place the product where it may contact water 

or high humidity.

• Make sure no small metal objects can fall on or around the product while in storage.
• Never transport a product with a battery power level higher than 30%.
• Never store the product in environments below -4°F (-20°C) or above 113°F (45°C).

 

ALL RIGHTS RESERVED

All  rights  reserved.  No  reproduction  allowed  in  any  form  without  written  permission  from 
Wattbricks

DISCLAIMERS

All  information,  illustrations,  and  specifications  in  this  manual  were  in  effect  at  the  time  of 
publishing. The illustrations used in this manual are intended as representative reference  views 
only. We reserve the right to make any specification or design change without notice.

Summary of Contents for MP330





















Reviews: