WATTBRICKS MP330, User Manual

BUTTON

CONTROLS

www.wattbricks.com 

07

A

B

C

A: MAIN POWER
B: LED LIGHT ON/OFF
C: DC ON/OFF Button
D: USB ON/OFF Button
E: AC ON/OFF Button

Button A:

MAIN POWER

Button A is the main power switch. Press Button A to turn on  or off

Button B:

LED LIGHT ON/OFF

Activates:
Single Press - Turn on/off LED light on back of unit
Double Tap - Activate SOS Mode, LED light visual distress signal.

Button C: DC OUT ON/OFF

Please 

Button C  to activate the DC out plug(s) after turning on the Main Power (A). 

Button D: USB OUT ON/OFF

Button D  to activate the USB out plug(s) after turning on the Main Power (A). 

The USB-C cable of different devices need different endorsements of corresponding protocols, 
if the USB-C port doesn't work, try to use the AC adapter to charge .

Button E: AC OUT ON/OFF

Press Button E to Activate the AC out plug(s)  after turning on the Main Power (A). 
Please turn off the AC Out Plug(s) when not in use.
Note: The Fan may turn on intermittently during high output loads or temperatures.
Wattage Limit Please observe the wattage limit on the AC OUT.

Wireless charger

MP330/MP500: Press Main Power (A)  to turn on or off the wireless charger. 

MP1000: Press Button D  to Activate the Wireless charger  after turning on the Main Power (A). 

Cooling fan 

Product utilizes an internal cooling fan to ensure the product is operating within the appropriate 
temperature range. MP500,when it experiences a higher output load, will automatically turn on 
the  fan  during  discharge  or  recharging  ,  the  fan  may  operate  intermittently  to  keep  internal 
temperature within operating range.
The fan will likely start when the AC circuit is activated to ensure proper operation.

Press 

Please Press 

D

E