TEMP-UNLOCKING MODE (TUM)
RE-ACTIVATE AUTO LOCKING MODE
POWER BUTTON ON THE INSIDE UNIT
(Valid for WATTLE® DOOR TOUCH & SMART)
Sequence:
# 1 Admin PIN code # 1
Example:
# 1 3456 # 1
The display blinks green, and you will hear a long confirmation tone.
The lock is now ready for the TUM mode, but the door is still locked. To
activate TUM enter any valid
code
and push
#
. The display once again
blink green. The door is now consistantly unlocked.
If you want to lock the door from inside push:
WATTLE® DOOR TOUCH & SMART
- the indoor power button. Now the
outdoor handle is disabled (locked).
WATTLE® DOOR PRO
- the # button on the interior display. Now the
outdoor handle is disabled (locked).
Caution
; When the lock is set to TUM mode and you have locked the
door with the inside power button
(# button on the WATTLE® DOOR
PRO)
, and someone enters their code from outside, the lock remains
open. Once again you will have to push the indoor power button
(# button on the WATTLE® DOOR PRO)
to lock the door.
You may also lock the door from outside by entering any valid code.
Sequence:
# 1 Admin PIN code # 0
Example:
# 1 3456 # 0
The display blinks green, and you will hear a long confirmation tone.
Then enter any valid
PIN code
and
#
When succeeded the display blinks red and you will hear a long
confirmation tone. Now you will have to enter the PIN code each
time you want to access the property.
Note: The default factory-set mode is Automatic Locking Mode.
If you hold the button in for about two Seconds you will activate the
outside unit. Then it will be open until you again push the power button
or if you push Your code from the outside.
37
