Form: AZ2-HZ-EBC-248-EBUS-Adapter-1B.doc
Page
1
of
1
Description
The HZ-EBC-248 is comprised of
the MS000248 E-BUS Adapter Hub
and a 1.5 Foot EBC Cable (Part
No. EBC-1.5F).
The E-BUS Adapter Hub is used to
provide a connection point for
multiple E-BUS Sensors or AZ 2
Expansion Modules. This E-BUS
Adapter Hub has four ports. One
port is used to connect the Hub to
an E-BUS Expansion Port on the
AZ2 or GPC-XP Controller or an
AZ 2 Expansion Module using the
supplied EBC-1.5F cable. This
leaves three ports available for E-
BUS Sensors and other Expansion
Modules.
The EBC Cable is a plenum-rated
high flex cable with EBC
Connectors on each end to allow
for multiple connections of the E-
BUS cables between the Sensors,
Modules, and the AZ 2 or GPC-XP
Controllers.
HZ-EBC-248 - E-BUS Adapter Hub
with 1.5 Ft. EBC Cable
Technical Data
HZ-EBC-248 E-BUS Adapter Hub with 1.5 Ft. EBC Cable
EBC E-BUS Cable
Available Length
and Part Number
EBC-1.5F (1.5 Foot) Current Rating
of Cable Wire
300 Vrms Min = 10.15 Ohms per 1000 feet @ 20
Deg Celsius, Nominal
Cable Type
Plenum-rated High Flex
Wire
Wire Colors
Red/Black First Pair; White/Blue Second Pair
Wire Size
19 Strands of 32 Gage
Wire, 4 Conductor
UL Listing No.
CMP/CL3P/FPLP
Terminations
Hub - (4) EBC Connectors
Cable – 2 EBC Connectors
Cable Sheath
Color
White, Plenum Rated CL3P/CMP
with “WATTMASTER EBUS”
marking every foot.
Three Year Warranty
WattMaster reserves the right to change specifications without notice
