4
ISOMIX HC-IM-DE-W-DE-10-2018-Rev1_enUS | Art. No. 10070436
EN
ENGLISH
3 Safety
3.1 Presentation of safety information
DANGER indicates an imminent danger
that may cause serious physical injury
or death if the appropriate safety
precautions are not in place.
WARNING indicates a danger arising
through incorrect behavior (e.g. misuse,
disregarding notices, etc.) that may
cause serious physical injury or death.
CAUTION indicates a potentially
dangerous situation that may cause
minor or slight injuries if the appropriate
safety precautions are not in place.
NOTE indicates a situation that
may cause material damage if the
corresponding precautions are not taken.
3.2 Important safety information
• Before using the Isomix, read this operating manual
through carefully.
• Connect the Isomix only to a power source that
corresponds to the mains voltage specified on the rating
plate of the Isomix.
• The power supply to the Isomix must be disconnected
prior to maintenance, cleaning and repair work.
• Maintenance, cleaning and repair work may be carried out
by trained specialist personnel only.
• The Isomix must not be used if it is damaged or is no
longer operating correctly. In this case, contact your
specialist dealer immediately.
• Observe the maintenance instructions and intervals.
• Protect the Isomix from the weather.
• Never use the Isomix outdoors.
• The unit may be used only in accordance with its intended
use.
3.3 Intended use
The Isomix-HC distributor control station is used for load-
based control of the flow temperature in surface heating/
cooling systems.
The flow temperature is controlled by the integrated
HEATING/COOLING controller in accordance with the
external temperature by means of a selectable heating/
cooling curve.
The steepness of the curve can be selected in accordance
with the conditions at the location (further details can be
found in the operating manual for the controller).
The Isomix-HC can be used to operate a heating system that
is set to the individual requirements of a home or of individual
living rooms or commercial areas.
The integrated CC-HC climate controller has 7-day
programming with 9 standard programs set in the factory
and 4 user programs that you can select yourself.
As an option, a room thermostat can be connected to the
CC-HC climate controller. Suitable room thermostats are
available in our range of accessories in cabled or wireless
versions. With these, operation of the heating system can be
optimized to the usage behavior of a reference room.
The control station is intended for direct fitting to the right or
left of round pipe heating manifolds with 1” male thread and
an axis dimension of 210 mm.
It comes with union nuts with a 1” G thread for this purpose.
The control station is intended for use in dry rooms in
residential or commercial areas.
It is usually installed in the heating room or in a distribution
cabinet.
The Isomix is not intended to be operated by people
(including children) with limited physical, sensory or mental
capacities, or by people with insufficient experience or
previous knowledge.
3.4 Foreseeable misuse
The following is considered to be foreseeable misuse:
• Operating the Isomix beyond its specifications.
• Improper use of the Isomix.
• Modifications to the Isomix that have not been agreed with
the manufacturer.
• Use of replacement or wear parts that have not been
approved by the manufacturer.
• Operating the Isomix outdoors.