background image

Page 28

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 Ways to Register

1. Online at www.wattspremier.com

2. Call in your information   1-800-752-5582

3. Fax in your information    623-931-0191

First Name:_________________________  Last Name:____________________________

Address: ________________________________________ City: ____________________

State: _______________________________________ Zip Code: ___________________

Country:                USA               CANADA               MEXICO           OTHER ____________

Phone # ______-__________ -__________     Email  Address: ______________________

Date of Purchase: ___________________      Date of Install: _______________________

Installed By:           SELF         Plumbing Professional     Where Purchased: ____________

Model Number: _______________________              Serial Number: ____  -  __________

 Watts Premier, Inc.  

 

  1725 W. Williams Drive   C-20                      Phoenix, AZ 85027

Phone: 800-752-5582 

 

       www.wattspremier.com 

 

         Fax: 623-931-0191

 Register your product online and receive a  5%  discount on your next online order, Plus receive reduced shipping.

4. Mail in the information

.

Please complete the form below. Mail to:

 Watts Premier

 

 

 

 

 

 1725 W. Williams Dr. C-20

 

 

 

 

 

 Phoenix, AZ 85027

 Fax this form directly to us.

Call and we will enter your information.

XXXXX  

XXXXXX

-

Watts Premier Inc. is concerned for the safety of your personal information. Watts Premier collects personal information when you register with 

Watts Premier. This information is stored in our data base and we do not rent, sell, or share personal information with other people or nonaffiliated 

companies. We reserve the right to send you certain types of communications such as direct mail, email, or by telephone relating to our products 

or products that you have purchased. We limit access to your personal information to those employees who will directly provide you with services 

or products  in order to do their jobs. We want to offer you four ways to communicate with us. 1.Online,  2.Fax,  3.Telephone,  and 4. Mail the form  

below. By registering your product you will receive the full benefit of our warranty. Watts Premier will also send you a semiannual filter change 

reminder beginning six months from date of installation. To insure the highest quality of your water, filters should be replaced every 6 months. If 

you have any questions or comments please give us a call at 1-800-752-5582 M-F 8:00am -5:00pm MST.

Registering will 

insure  you 

receive Watts

FREE

 

Filter 

Reminder 

Service

Thank you for selecting Watts Premier for your water filtration needs.

WARRANTY REGISTRATION

Summary of Contents for B-RO5M-50

































Reviews: