Modulex EXT Commercial Series Boilers User Manual
CHAPTER 2: General Information
OMM-0095_0H
AERCO International, Inc.
•
100 Oritani Dr.
•
Blauvelt, NY 10913
Page
17
of
144
GF-139
Phone: 800-526-0288
09/15/2017
2.9 TOOLS, MATERIALS, AND ADDITIONAL EQUIPMENT
For the installation and maintenance of the boiler you will need:
•
Standard tools for space heating, gas, and water fitting
•
Manometer that is capable of reading both positive and negative pressures
•
Combustion analyzer
•
Digital multimeter
•
pH digital meter
•
Metric Allen wrenches
•
Metric socket wrenches
2.10 DISPOSAL OF PACKAGING AND PARTS
•
Dispose of the boiler packaging in an environmentally sound manner.
•
Dispose of components of the heating system (e.g. boiler or control device), that must be
replaced in an environmentally responsible manner.
2.11 GENERAL WARNINGS
2.11.1 Using the Operation and Maintenance Manual
This instruction manual is an integral and indispensable part of the product and must be
retained by the person in charge of the appliance. Please read the instructions contained in this
manual carefully as they provide important information regarding the safe installation, use and
servicing of this appliance. Keep this manual in a safe place for future reference.
2.11.2 Installation and Servicing Personnel
Installation and servicing must be carried out in accordance with the regulations in force
according to the manufacturer’s instructions and by legally competent authorized persons. By
definition, a competent person is a person who has a specific technical qualification in the field
of components for central heating systems for domestic use, domestic hot water production, and
servicing. This person must have the qualifications legitimized by the current laws and
regulations in force.
Inappropriate, incomplete, or irregular servicing could compromise the safe operation of the
appliance, and could cause injury to persons, animals or damage to property. The manufacturer
shall not be held liable for any such injury and/or damage.
Any repairs must be carried out by AERCO authorized technicians and using only original spare
parts. Non-observance of the above requirement may jeopardize the safety of the appliance and
void any warranties.
In the event of failure and/or faulty functioning of the appliance, switch off the boiler. Do not
attempt to make any repairs, but instead contact qualified technicians.
To guarantee the efficiency and correct functioning of the appliance it is required that the boiler be
serviced annually by a qualified person.
2.11.3 Installation Materials
The installations for the domestic hot water production MUST be built, in their entirety, with
materials (taps, pipes, fittings, etc.) approved for drinkable water.
