AccUView LED (1/2020)
Rev 2
24
7.18 Saving Configuration Settings
If extended settings is set to
OFF
, pressing the
↵
button will save all settings and the
AccUView LED will automatically return to the normal
AUTO
mode of the instrument.
If extended settings is set to
On
, after the last menu of the extended settings, pressing the
↵
button will save all settings and the AccUView LED will automatically return to the
normal
AUTO
mode of the instrument.
The
CONFIG
menu may be used at any time to reset or change any of the parameters.
The
CONFIG
menu may be exited at any point in the menu by using the
MODE/EXIT
key. Any features that have been modified will be saved.
While the operating in
CONFIG
mode the reading before entering that mode is held.
