background image

 

 

 

 

 

 
 
 
Equipment modernization package 

 

APPLICATION 

The HS-200 PT RO Processor is specifically designed to 
supply treated water for point-of-use electric steam 
generators to significantly reduce or eliminate boiler 
scaling and to extend peak equipment performance.  
This unit is intended for use with a single 
sterilizer/electric boiler combination – with boilers in the 
range of 12 to 30 KW. 

 

FEATURES 

  Universal mounting system for quick, easy 

installation. 

  Attractive Stainless Steel Cabinet. 

  Small size (24”x16”x20”) permits installation 

virtually anywhere. 

 

BENEFITS 

  Requires service connection to cold / hot water 

supply and drain.  No electrical requirement. 

  Extended life from boiler heating element. 

  Increased reliability – fewer equipment breakdowns 

due to boiler scaling. 

  Convenient quarterly maintenance intervals with 

economical PM packages available. 

SPECIFICATIONS 

  Provides 5-50 TDS output water from potable 

water sources up to 2000 TDS, 250 ppm or 14 
grains hardness. 

 

 

 
 

PM package (available separately) 
Includes a year’s supply of consumable 
components.   

 

Watts Modernization Package 

HS-200 PT 

Reverse Osmosis Processor 

Getinge Part #61301605522 

 
 
 

 

 
 
 
MATERIALS AND SERVICES SUPPLIED 

Self contained RO Processor including filters, 
housings,

 

pressure tank, bypass valve and 

permeate pumps in a stainless steel cabinet. 
Includes connection to equipment. 
 

WARRANTY 

Watts HS-200 PT systems are warranted for one 
year.  Labor for repairs is provided for 90 days 
following installation and start-up.  Warranty repairs 
will be performed Monday through Friday, 8am to 
5pm, excluding weekends and Holidays. 
 

Summary of Contents for HS-200 PT















Reviews: