PWSRTA Twin Alternating Series Softeners
7
Press the
Set Clock
button
Adjust hour with the
UP
and
Down
arrow buttons. There is an AM and PM indicator at the
top of the display
Press the
Next
button to advance
to the minutes.
Adjust minutes with the
Up
and
Down
arrow buttons.
Press the
Next
button to set time
To Exit
Chart 1: Setting Time of Day
The
Water Softener Capacity
of the system needs to be known prior to programming the system, to insure proper programming and
efficiency of system
NOTICE
Once in the programming settings, simply use the
UP
and
DOWN
arrow buttons to change values
NOTICE
To enter the Master Programming
mode, press and hold the
NEXT
and
DOWN
arrow buttons simulta-
neously for 3 – 5 seconds
The display should read
SOFT
with an arrow next to the word
SET
. If
FLTr
is displayed on
the screen, hit the UP or DOWN arrow to display
SOFT
. This indicates you are now in the
Master Programming Mode
Press
NEXT
Button
This will take you into
1st Backwash
setting and should be set at
8 minutes
Press
NEXT
Button
This will take you into
BRINE DRAW
setting and should be set at
60 minutes
Press
NEXT
Button
This will take you into
2nd Backwash
setting and should be set at
8 minutes
Press
NEXT
Button
This will take you into
RAPID RINSE
setting and should be set at
6 minutes
Press
NEXT
Button
This will take you into
BRINE TANK REFILL
setting and should be set at following times
based on your water softener capacity
For
30K Water Softener
- Fill (brine tank refill) is set at
6 minutes
, which is most efficient
setting. This can be changed to maximum brining if needed, maximum brining would be set
at 10 minutes.
For
45K Water Softener
- Fill (brine tank refill) is set at
8 minutes
, which is most efficent
setting. This can be changed to maximum brining if needed, maximum brining would be set
at 15 minutes.
For
60K Water Softener
- Fill (brine tank refill) is set at
12 minutes
, which is most effi-
cient setting. This can be changed to maximum brining if needed, maximum brining would
be set at 20 minutes.
Press
NEXT
Button
This will complete Master Programming Steps
Chart 2: Master Programming
To enter Installation Display Setting
Programming mode, press and hold
the
NEXT
and
UP
arrow buttons
simultaneously for 3 - 5 seconds
Volumetric capacity in gallons to regeneration (will soften 2500 gallons before a regeneration
is queued.
Press
Next
Button
Day Override. Default should be set to
14
Days. Watts Pure Water water softeners regener-
ate based on water usage, but this day override setting will come into play if the softener sits
idle or has not regenerated and will automatic initiate regeneration on the 14
th
day.
Press
Next
Button
REGEN - Indicated when the system will regenerate, should be read 0”
Press
Next
Button
Chart 3: Installer Programming
Next you will need to set up Installer Programming, this
MUST
be done in addition to the Master Programming
NOTICE
Programming completed, Valve will return to normal mode and will be in service.
If you have additional questions regarding your water softener programming, please contact
Pure Water Technical Support at 1.800.224.1299, then press #2
Summary of Contents for PWSRTA Series
Page 42: ...42 PWSRTA Twin Alternating Series Softeners NOTES ...
Page 43: ......