9
IOM-UpGradeKit-SentryPlusAlert2
2013
EDP# 2916013
© 2020 Watts
Flood
The FLOOD LED only turns on when excessive relief valve discharge from your backflow
assembly is detected.
COLOR
STATE
DEFINITION
SOLUTION
Steady Orange
Water is discharging from the relief
valve of your backflow assembly, and
it is more than a slight drip.
Note:
This will only turn on if water
discharge is detected and delay timer
has reached 0.
If your device is registered, you will
receive a “flood notification” via text,
email and/or a phone call.
Blinking
There is a problem with the Modbus
connection between the Control Box
and Cellular Gateway.
Check the wiring between the Control
Box and Cellular Gateway on page 11.
Off
There is no discharge occurring.
N/A
Cellular
The CELLULAR LED indicates whether or not a cellular connection is present.
COLOR
STATE
DEFINITION
SOLUTION
Steady Blue
A cellular connection is present.
N/A
Short off blink
The cellular connection is poor.
See Poor or No Cellular Reception on
pages 7-8.
Blue blinking
There is no cellular connection —
searching.
See Poor or No Cellular Reception on
pages 7-8.
IoT
The IoT LED indicates whether or not there is a connection to the Cloud.
COLOR
STATE
DEFINITION
SOLUTION
Steady Blue
There is a connection to
the Watts Cloud.
N/A
Blinking
There is
not
a connection to
the Watts Cloud. Trying to establish
connection.
See No Connection to the Cloud on
page 9.
Power
The POWER LED turns on when power is supplied to the device.
COLOR
STATE
DEFINITION
SOLUTION
Steady Green
The device is turned on.
N/A
Off
If the device is plugged in, but this
LED is not on, the device is not
receiving power.
Check wiring to control box.
LEDs
The LEDs inside the Cellular Gateway indicate if a component/
connection is running, or if there is an issue. The following sec-
tions describe the different LED colors and blink patterns.
