3 of 8
SYSTEM IS MELTING
The control has either detected
snow/ice and automatically started
or the control was manually started.
SYSTEM IS OFF
The snow melting system is off and is
ready to detect snow or ice.
SYSTEM IS IDLING
The control is pre-heating the slab
to the idling temperature. This
reduces the amount of time needed
to reach the melting temperature in
the event snow or ice is detected.
STORM PREDICTED
The Internet local weather forecast is
predicting a snow fall and the control
is pre-heating the slab. This reduces
the amount of time needed to reach
the melting temperature in the event
snow or ice is detected.
SYSTEM IN OVERRIDE
The control is in a manual override
for testing purposes or manually
disabled.
The snow melting system operates in one of these five modes:
User Interface
View status of sensor
readings and equipment
Remaining melting
run time
System operation
information
Go to settings menu
to setup control
Information about slab
and outdoor
conditions
Symbols
!
WARNING SYMBOL
The control has a error message. Press the warning symbol to determine the error code and information on how
to take corrective action. Refer to the Installation and Operation Manual for a list of error codes.
