background image

Wattsonic AIO ESS | USER MANUAL

56

Auto-Test

Monitoring and Configuration

This function is disabled by default, and only will be functional in the safety code of 
Italy. Short press the button several times until “Auto Test CEI 0-21” displays on the 
screen, press and hold the button 3 seconds to activate “Auto Test”. After the auto 
test finished, short press the button several times until the screen displays “Auto Test 
Record”, and hold the button 3 seconds to check the test result. 
The auto test type will be chosen from “Remote” and “Local” before starting the auto 
test. “Remote” is set as 1 by default, which only can be modified to “0” by sending 
an external command and “Local” is set as 0 by default, which can be modified to 1 
through operating the button on the inverter.  According to the requirements of the 
standard, the test has been divided into three modes: 
1) “Remote” set as 1, “Local” set as 0, then the test order is 59.S1, 59.S2, 27.S1, 81>.
S2, 81<.S2; 
2) “Remote” set as 1, “Local” set as 1, then the test order is 59.S1, 59.S2, 27.S1, 81>.
S1, 81<.S1; 
3) “Remote” set as 0, “Local” set as 1, then the test order is 59.S1, 59.S2, 27.S1, 81>.
S2, 81<.S2.
Connect the AC cable, auto test will start after the inverter connected to the grid, see 
the operation steps below:

Wattsonic inverter provides a monitoring port that can collect data from the inverter 
and transmit it to monitoring website via an external monitoring data collector WiFi 
or LAN module. Please check the WiFi user manual for more details.

The auto test will start when the correct test item is selected, and the test result 
will be displayed on the screen when it finished. If the test success, it will display 
“Test Pass”, otherwise will display “Test Fail”. After each item tested, the inverter 
will reconnect to the grid and automatically start the next test item according to the 
requirements of CEI 0-21.

Short press(1s),switch window

Long press(3s),enter the lower Menu

Remote Cmd

1

Select

Items

Wait

Wait

Wait

Wait

Wait

General 

Settings

Auto Test

CEI 0-21

Main Windows

IPS Item

xxxxx

Test Record

If 

Tested

Test Result

Display

Local Cmd

0

IPS Item

Test Null

Password

1111

Verify Ok

Password

1111

Setting

IPS Item

Test All

IPS Item 

Testing

Test Pass/Fail

Summary of Contents for WTS-10KW-3P





























































Reviews: