CARDIO WAVE EXCITE Class & Trend: Service & maintenance manual- rev.2.0
Pagina 8.5
8.5.
THE DISTANCE BETWEEN THE PEDALS
Figure 8.5-1
Carry out the operations described in
paragraph: 7.7. “Disassembling the guards”,
only the posterior guard.
1.
Back off the counter nut
(a)
using a 17mm
wrench.
2.
Acting on the Shock absorber
(b)
with a
13mm wrench, for adjusting the distance
between the footboards, in stand-by position,
look again.
Figure 8.5-2
3.
Rotate the shock absorber in clock wise or
counter clock wise, until the distance
between the two pedals is
50mm
, forcing
them in its upper position..
Put some drops of Loctite on the counter
nut (a), to fix it.
ATTENTION: check that the shock
absorber, even in its two extreme
positions, i.e. with one lever at its end of
travel and the other at rest, retains a
slight amount of play rotating it on its
axis.
Summary of Contents for CLASS & TREND
