14
PURIFICATION STAGES - PRIME+
2- IN- 1 PRE-FILTER
SEDIMENT &
CARBON BLOCK
BOOSTER
PUMP
RO/ UF MEMBRANE
PRE-ACTIVATED
CARBON
4-IN-1
MINERAL
CARTRIDGE
LED UV INSIDE THE
SATER STORAGE
TANK
FLOAT VALVE
PURIFICATION STAGES
Stage 2: CTO
removes Chlorine and odour. A CTO filter will produce water that is much clearer in
colour with a more appealing taste.
Stage 4: RO Membrane
is a water treatment process that removes contaminants from water by using
pressure to force water molecules through a semipermeable membrane, which is 0.001 micron thick. It
can effectively filter the small organic matter and other contaminants which are then filtered out and
flushed away, leaving you with clean and delicious drinking water.
Stage 1:
Built in smart Pre-filtration, a combined filtration of
Polypropylene
and five - micron
CTO
filter Polypropylene filter removes dirt, impurities, rust, slime, sand and grit.
Stage 3:
Coconut shell Activated Carbon filter is a method of filtering water that uses Activated Carbon
Granules to remove contaminants and impurities using chemical absorption. Each Granule of carbon
provides a large surface area allowing contaminants the maximum possible exposure to the active
sites within the filter media, so that the water becomes sweeter in taste.
