EN
7
Ensure to check all parts are present:
2. PACKAGE LIST
2.1. Package list
liner
Caps
RCD plug
Pump unit
Repair kit
wrench
Top cover
ground sheet
Pump unit connectors
Couverture
Couverture
Couverture
Couverture
Couverture
Couverture
3.2. RCD test
1. Insert the plug into the
power outlet.
2. Press the «RESET» button,
the indicator light turns red.
3. Press the «TEST» button,
the indicator light turns off.
4. Press the «RESET» button,
the indicator light turns red.
The RCD works properly.
3.1. Site selection
Clean the place
A level place
A place with an awning
WARNING :
Before proceeding to install your spa, please ensure that the allocated
location meets the following conditions :
•
A level place in order to avoid any defect, hernia or leakage.
•
Wide enough to support the pool and its pump unit.
•
•
Sheltered from the sun and bad weather.
•
Clean and free from sharp objects.
•
Devoid of aggressive vegetation on the ground.
3. INSTALLATION
WARNING: The RCD plug must be tested before each use..
Do not use if RCD test fails and see chapter 6.1.
Grounding
section.
WARNING :
Spa installed on inadequately level surfaces are subject to leaking. forming irregulari-
ties or may collapse. which can result in property damage or serious injury for those in or around the
spa area!
CAUTION :
Please choose your set-up area carefully as lawn and other desirable vegetation
undereath the ground sheet (if applicable) will die. Furthermore, try to avoid setting the ground sheet
in areas prone to aggressive plant and weed species, as they may grow through the ground sheet.
