E
RROR
! R
EFERENCE SOURCE NOT
FOUND
.
P5186 U
SER
M
ANUAL
V 1.0
Error! Reference source not found.
5.7 RESET
function
When
SW203
is pressed (
RESET
button), the WISMO module is reset.
5.8 KEYPAD
function
The following table shows the matrix of the keyboard:
COL0
COL1
COL2
COL3
COL4
ROW0
SW400 SW405 SW410 SW415 SW420
ROW1
SW401 SW406 SW411 SW416 SW421
ROW2
SW402 SW407 SW412 SW417 SW422
ROW3
SW403 SW408 SW413 SW418 SW423
ROW4
SW404 SW409 SW414 SW419 SW424
Example: If you press the key SW412, an electric detection will be made on ROW2 and COL2.
5.9 Antenna
function
The antenna is connected to the board via the
SMA300
connector.
The antenna cable is fitted with a FME connector and a SMA/FME adaptator is supplied to permit
the connection to the board.
5.10 ESD protections
External ESD protections are added on the mother board for the following signals:
WISMO Pac P5186
VBATT and CHG_IN input signals.
WISMO Pac P5186
/RESET and BOOT input signals.
WISMO Pac P5186 SIM interface signals
: SIM_PRES, SIM_VCC, SIM_IO, SIM_CLK,
SIM_RST,
WISMO Pac P5186 Serial link signals (UART1
): TXD1, RTS1, DTR1, DSR1, RXD1,
CTS1, RI1 (GPIO6) and DCD1 (GPIO7).
Main audio interface signals.
Auxiliary audio interface signals.
confidential ©
Page :
36 / 42
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.