Assembly Instructions
STEP 1 - Seat assembly
Install seat -
Identify the Slide Rail (112). Then remove the set of four M8 bolts
(106), four M8 spring washers (105), and four M8 flat washer (6)
from the slide rail (112) and set them aside. Remove two screws
(103) and rail bumper (102).
Attach seat -
Remove rail cap (101). Slide seat (119) onto rail (112). Reattach
Rail cap (101).
Re-install rail bumper -
Use wrench key (120) and hex wrench (121) to reattach the
pre-installed rail bumper (102), with two screws (103).
8