A
36
T
ransmit
ter
s
/
English
8.3.3
Available transmitters
This section shows the transmitters that are connected
to the app. The active transmitter is marked with an
ACTIVE
badge.
Tap on a row to view details for that transmitter.
8.4
Charging a transmitter
The transmitter is a rechargeable component. When ful-
ly charged, the transmitter can last for the entire 14-day
session.
1.
Place the transmitter in the charger.
2.
Insert the Micro USB end of the USB cable into the charger.
3.
Insert the other end of the USB cable into a computer.
Make sure the computer is turned on.
NOTE: If necessary, you can use an AC wall adapter that complies
with the specifications in
SECTION 16.4.5
.
The light on the charger indicates the status of the tran-
smitter.
See
SECTION 8.4.1
for details about the charger light.
This transmitter may take up to 4 hours to be fully char-
ged.
CAUTION
If you want to use a computer to charge the transmitter,
a USB port supporting a minimum charging current of
100 mA is required. Check your computer user manual
or contact the computer manufacturer to make sure the
device meets these requirements. The USB port on your
PC must comply with 60601-1 ed. 3.1 at a minimum.
8.4.1
Charger light
While the transmitter is in the charger, the light (A) on
the charger indicates the transmitter status.
Summary of Contents for A.MENARINI diagnostics GlucoMen Day CGM
Page 1: ...User Guide...
Page 65: ......
