Abnormal Compressor ‘ Warning’
During operation, any malfunction can trip the compressor to fail, resulting in a compressor shut off. It
takes 3 minutes to recover from the protection period.
After the water reservoir is removed it takes about 3 minutes to start up the unit again for
protection purposes. To avoid this protection period, simply remove the plug from power
socket to restart the unit.
Protection Of Extremely Low & High Temperature
1. When the sensor on the air intake detects ambient temperature
≤
0ºC or
≥
40ºC, the appliance will shut off
automatically for protection, and the warning beeps will continue with 3 long and 2 short signals.
When the sensor detects ambient temperatures
≤
0ºC, 0ºC is showed on the LCD display.
When the sensor detects ambient temperatures
≥
40ºC, 40ºC is showed on the LCD display.
2. When sensor on the evaporator detects its temperature
≥
40ºC, the appliance will shut off automatically
for protection, and the symbol for automatic defrost illuminates.
1. If all function keys are not working, you should switch off at the mains to restart the unit.
2. After the unit has experienced extremely low & high temperature, the appliance will not
keep its memory function when restart.
Failures Of Humidity & Temperature Sensor
1. When an error between the humidity and temperature sensor occurs, the symbol of dehumidification
will flash, and “0ºC” “0%RH” is displayed on the LCD display. At this point the appliance adopts the
continuous dehumidifying mode.
1
）
If the temperature sensor malfunctions, the appliance will adopt the continuous
dehumidification mode and not a controlled humidity setting.
2
）
This malfunction will not influence the dehumidification.
2. When the temperature sensor of the evaporator is an open circuit or short circuit, the symbol of defrost
will flash, and the appliance turns to dehumidifying and defrosting mode: dehumidifying for 20
minutes, then defrosting for 5 minutes.
1
）
If the temperature sensor malfunctions, the keys within the control panel will perform normally.
2
）
If the temperature sensor malfunctions, the appliance will continue to work with lower efficiency.
Memory Function
If the power supply is cut off when the appliance is running, it will memorise its working mode
automatically. Once power has been restored, the appliance will restart and continue in this working
mode.
！
！
