WaveMark Document 97-0009 Rev B
The WaveMark SmartWand has a USB-mini-B port adjacent to the charging port. This USB port is
not currently supported for any user accessible purpose. It also will not successfully charge the
battery in the WaveMark SmartWand. Do not plug a USB cable into this port.
When you are ready to use the WaveMark SmartWand to read RFID tags or Barcodes, disconnect
the charger, slide
the power switch to the “on” position, and follow the instructions of the Host
software application that you are using.
The SmartWand battery pack is customer replaceable. This should only be necessary after
approximately 300 charging cycles when the operating time is no longer sufficient. Use only
battery packs that are supplied by WaveMark (part number 04-0098-R). Replacement instructions
are supplied with the purchase of a spare battery.
Charging port
USB port