4. Installation and operation
9
AON 5.1ch Gaming Headphone
Copyright
©
2006, WaveON Inc. All rights reserved
①
Power
Button
Turns
the
power
ON/OFF
②
Mute
Deletes
the
volume
③
TEST
Tests
all
6ch
sound
• Front
Left
→
Center
→
Front
Right
→
Rear
Left
→
Rear
Right
→
Subwoofer
④
VOL
Adjusts
the
Volume
• Dolby
Decoder's
buttons
are
blinked
as
VOL
is
Pressed.
⑤
FUNCTTION
BUTTON
• F1
+
VOL :
Adjusts
DRC
(High
Level
Cut)
Value
• F2
+
VOL :
Adjusts
DRC
(Low
Level
Boost)
Value
• F3
+
VOL :
Changes
the
current
mode
to
Stereo
PCMPress
F3
again
to
return
to
the
current
mode
Adjusting
"DRC (Dynamic Range Compression) High Level Cut"Value
①
Press F1 button
→
press the volume up/down button
: Dolby Digital LED is blinked two times then DRC value is
increased or decreased as volume up and down button
pressed. When DRC value reaches maximum or minimum,
Dolby Digital and PL LEDs are blinked by turns.
②
Press F1 button again
: The adjusted DRC value is saved and returns to the nor-
mal mode.
Adjusting
"DRC (Dynamic Range Compression) Low Level Boost"Value
①
Press F2 button
→
press the volume up/down button
: Dolby Digital LED is blinked two times then DRC value is
increased or decreased as volume up and down button
pressed. When DRC value reaches maximum or minimum,
Dolby Digital and PL LEDs are blinked by turns.
②
Press F2 button again
: The adjusted DRC value is saved and returns to the nor-
mal mode.
