SOUND&DEMO
if you want to transfer the card sounds and all
patterns and songs of the card to the internal memory.
The R-8 now shows you under LOADED the card that is already
in memory and under LOAD the card that is to be loaded into the
memory. Then confirm with the key
Enter
.
The R-8 now copies all relevant data (parameters, names, pat-
tern and song data, etc.) into the internal memory. The sample
data is not loaded from the card but read from the card when
playing on-the-fly.
If the copy operation was successful, this will be displayed with
the message "Completed" on the display. The card content is
now available for use in the R-8.
You can now assign the instruments of the card (Card Sounds)
to the pads of the R-8. Note that the card sounds start with the
prefix
E
(!), C are the copy instruments.
If, in wise foresight, you have already assigned Card Sounds to
the pads in advance, you can play your instruments directly after
loading the card.
Save a card
You can save your compilation at any time. To do this, click on
the
Save Card
button in the main window.
A dialog box opens. Navigate to your preferred location from the
window. Enter the name of your compilation and click
OK
to save
it.
You can see that your compilation is unsaved by the fact that
"Unnamed Card" is displayed in the title bar of the window.
As soon as you have saved them, the file name will be displayed
here.
If your composition has changed, this will be indicated by a * af-
ter the file name. You should now save again so as not to lose
your changes.
32
Summary of Contents for WaveR8
Page 1: ......
