background image

AP420

Safety instructions

January 2023

Version : 0.46-beta (for firmware 1.0 or higher)

7

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN 
EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO 
THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” 
WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF 
SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC 
SHOCK TO PERSONS

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS 
INTENDED TO ALERT THE USER TO THE PRESENCE OF 
IMPORTANT OPERATING AND MAINTENANCE (SERVICING) 
INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE 
APPLIANCE.

Warning, the user's guide must be red each time the symbol is written.

Direct current

WEEE

User's guide must be red each time this symbol is written.

Positive electric polarity

Terms of use

• This product has been designed for indoor use only.

• The device must be attached under 2m high from the ground.

• If this device has been exposed to very high temperature fluctuations (e.g.: after transportation), do not 
connect it immediately. The condensation formed inside the device could damage it. Allow the device to 
reach ambient temperature before connecting it.

• Do not shake the device. Avoid sudden movements during its installation or handling.

• When selecting the spot for installation of the player, ensure that it is not exposed to a high source of 
heat, moisture, or dust. There

should not be any cables lying around as they might jeopardize your and others' safety.

Summary of Contents for AP420

























Reviews: