® Waves System
V 2.0 - 2007
I.D. AL - SP203 - Professional MP3 audio player - Manual
Feature of keys 1 to 9 :
When you press one of these keys, you will play a specific file placed in the "IN" directory.
When the player is in "Play" mode, the current file is interrupted to broadcast the file Txxx.MP3 associated
to the pressed key. At the end of the special file, the player will broadcast the next file in the current
directory.
When the player is in "Stop" mode, the selected file is broadcast and then the player stops.
3 – Autoplay mode
When the Autoplay mode is ON, the player starts automatically to broadcast on power on. The player
reads the files of the directory it was reading when the unit was switched off.
When the Autoplay mode is OFF, the player goes to STOP mode and awaits a command.
AUTOPLAY
ON / OFF
To change mode, use
4 – SPOTS
This function is only available with the “Timer Message” option to manage advertising spots. Contact
Waves System for details.
5 – DVD
This parameter is used to activate the CD/DVD player. In some instances, it may be appropriate to
deactivate the player to forbid update of the hard disk.
DVD
ON / OFF
ON : The CD/DVD player is activated
OFF : The CD/DVD player is deactivated
6 – RESET FACTORY
To reinitialise the player to its original configuration (volume, balance, time…) or after the firmware
update.
RESET FACTORY :
Press
to start a reset factory.
The procedure lasts 12 seconds and is completed when an “OK” message is briefly displayed on the
top right corner of the panel. The system goes back on Reset Fact.
- 12 -
