MDMX Fuzz
MDMX Distortion Modules / User Guide
14
EQ Section
The EQ section is a four-band equalizer that applies an EQ after the distortion generator and dynamics processor. It
feeds directly to the Output section.
There are four fixed-frequency bands:
Low:
low shelf, fixed frequency
Low Mid: bell filter with three frequency settings (A, B, C)
High Mid: bell filter with three frequency settings (A, B, C)
High:
high shelf, fixed frequency
Gain range for all bands: -12 dB to +12 dB
Default gain for all bands: 0 dB
Output Section
The Output section is the end of the plugin’s chain, so its three
controls are post-distortion, post-dynamics, and post-EQ.
T
EMPERATURE
Controls the warmth of the output signal. Higher settings are darker and
fatter and can appear as more distant. Lower settings are usually more
present, with more “sparkle.” The EQ section and the Temperature control
do not have the same effect on the final sound, so experiment with both.
Range: 0 to 100, Default: 50
M
IX
Controls the balance between the processed signal and the dry signal.
Range: 0 to 100, Default: 0
O
UTPUT
Sets the output level of the plugin.
Range: -24 dB to 24 dB. Default: 0 dB
