MDMX Screamer
MDMX Distortion Modules / User Guide
20
T
ONE
Changes the treble/bass color of the overdrive signal as it’s being processed. This changes the color of the distortion itself, so
has a big influence on the “core sound.”
Range: 0–100
Default: 50
HD
O
N
/O
FF
(On) enables x8 up-sampling of the output signal.
With low-resolution files, low and high frequency parts of a signal tend to collapse, and compression can be perceived as edgy.
Up-sampling provides more room to these parts of the signal and can result in a more pleasant sound.
When HD is Off, you can usually get a grittier sound.
Range: On or Off
Output Section
T
EMPERATURE
Adjusts the overall color and feeling of the output of the plugin. Higher settings generally result in a roomier, darker, and
smother sound. Lower settings usually provide more presence and more articulation.
Range: 0–100
Default: 50
M
IX
Controls the balance between overdrive processing and the dry signal.
Range: 0 (all dry signal) to 100 (all processed signal)
Default: 100
O
UTPUT
Sets the output gain of the plugin. The LED shows peak output level. A red light means that the signal is activating the output
limiter (-0.9 dB), so if the LED is constantly red, reduce the output gain. Excessive limiting will change the texture of the output
audio. This is not necessarily bad, but you should be aware of it.
