5
The Nx Head Tracker
Attaching the Nx Head Tracker to Your Headphones
After you insert a standard AAA battery into the Nx Head Tracker, position the
device at the top-center of the headphone arc, with the Nx logo facing forwards
(battery in the back). The Nx Head Tracker will not track your head movements
properly if you place it off-center or facing backwards.
Wrap the strap around the headphone arc and attach it to the hook on the other
side. The strap can be disconnected at both ends for replacement: any standard
rubber band can be used if needed.
Button Functions
A short press (under two seconds) in any state will place the unit in advertising
mode. In this mode, the device can be detected and paired with your computer.
A long press (over two seconds) will place the unit in sleep mode and disconnect it.
Battery
The device works with any standard AAA battery, providing approximately 40 hours
of work. Replace the battery through the bottom hatch. The device will go to sleep
automatically after a period of time if it is not connected or not moving. In sleep
mode, the battery life can last for months.
