22 / 69
table in the appendix. All code systems correspond to "9" and "9", and the saving operation
corresponds to "1" and "3".
After confirming, scan "Start Adding Keyboard" barcode, "Add Suffix" barcode, "9" in turn,
"9", "1", "3", and finally scan "Save" the barcode.
(where "9" and "9" correspond to all coding systems, and "1" and "3" correspond to saving after
decoding the output.)
PREFIX/SUFFIX CLEARING
The prefix/suffix of a code system can be cleared. If a prefix/suffix of one code system has been
added, you can scan the barcode "Clear prefix/suffix of one code system" to delete all prefix/suffix
characters from this code system. Scanning "Clear prefixes/suffix of all code system” will delete all
code prefixes/suffixes.
1. Scan the barcode "Clear the prefix of one code system" or "Clear the suffix of one code
system".
2. Determine the 2-digit hexadecimal value of the prefix/suffix code system to be cleared from
the appendix code system chart
.
3. Scan the 2-digit hexadecimal value in
of this manual; For example, scan "9",
and the "9" barcode is applied to all coding systems.
4. Scan the "Save" barcode.
PREFIX SELECTION
Clear the Prefix of a Code
System
Clear the Suffix of a Code
System
Save
