Meßkabel mit Diode verbinden – rotes mit Anode; schwarzes mit Kathode.
Spannungsabfall in Durchlaßrichtung ablesen (ung. 0.6V für eine Silikon-Diode
und 0.4V für eine Germaniumdiode. Ein Biebton bigt eine gute Diode an. Eine
offene Diode wird mit “OPEN” angezeigt.
❹
Verbindung umdrehen um in
Sperrrichtung zu messen. Eine gute Diode wird mit “OPEN” angegeben.
A n m e r k u n g :
“OPEN” in beiden Richtungen zeigt eine offene Diode an; eine
niedrige Ablesung eine kurzgeschlossene Diode. Transistorübergänge können wie
Dioden getestet werden.
E • Comprobación de diodos y transistores (vea Fig 4)
En esta prueba se mide la polarización directa de la unión de un diodo.
❶
Conecte las puntas de prueba como se muestra en la Figura 4.
❷
Ponga el
selector de función/escala en la posición
.
❸
Aplique la punta de prueba
roja al ánodo y la negra al cátodo. El visualizador indica la caída de tensión
directa (aprox. 0.6 V para diodos de Si, o 0.4 V para diodos de Ge). Una unión
abierta se indica mediante una lectura “OPEN”.
❹
Invierta la conexión de las
puntas de prueba para comprobar la polarización inversa del diodo. “OPEN”
indica un diodo en buenas condiciones.
– 19 –
Fig. 4
2020/30.Man.3x5,25/XPr 19/06/97 14:36 Page 21