1 .
Unplug instrument from A C power source .
2.
Stand instrument on one side.
3.
Align rack mount bracket with raised edge of instrument as shown.
4.
Holes on rack mount bracket should correspond to pem nut holes just underneath black
trim stri p . Use a pointed object to pierce the black trim strip at the pem nut holes.
5.
Use lock washers and metal screws provided to secure rack mount bracket.
6.
Repeat for other side bracket.
CAUTION: Rack mount brackets are to prevent the instrument from sliding when
mounted in a rack. They are not intended to support the weight of the instrument and
should never be used for lift i n g or carrying
Instrument is now ready for rack installation.
2-2
MODEL
5100
RACK MOUNT
BRACKET
Figure 2-0.
PEM NUT (2)
ALIGN
THESE
EDGES
Installing Rack Mount Bracket
CA UTION
A l ways ensure that the 1 1 5/230 vol t switch is set for the
nomi nal l i ne vol tage and that a fuse of the proper rating
is insta l l ed i n the instrument. If the switch is set i n correctly
or a fuse of the wrong rating is used, the i nstrument may be
damaged or foi l to o perate.
Summary of Contents for 452
Page 16: ......
