[3]
INTRO TO THE V9 PAGING SYSTEMS
The SPS5 v9 series of paging systems transmit POCSAG messages and/or tones to Paging Data
Receivers (PDRs). These messages can come in various paging protocols, or in various methods of delivery
such as automatic transmission, manual typing of messages, and it can also receive messages from other
devices as long as the paging data protocol is compatible with an SPS-5v9 system. Below is a picture of our
current line of paging systems which will be broken down as well as any other systems that are compatible
with the Paging Encoder Setup v9 software. Each paging encoder can be sold separately without the radio
transceiver for your own custom build, and the main operation of the encoder does not change.
Figure 1: Current Paging System Lineup
SYSTEM OVERVIEW
Your WaveWare v9 Series Paging System includes a UHF or VHF transceiver, an onboard RS-232 Serial
COM port, and an Ethernet interface for communications and encoding paging messages for RF transmission
using the industry standard POCSAG paging protocol. The v9 series Radio Transceiver maintains an input
buffer, which can receive commands from a Host Device by a Serial or Ethernet connection while a page is
being transmitted. When a command is received from the Host Device, the Encoder responds with a message
back to the Host Device, encodes the paging message into POCSAG format, and transmits the encoded paging
message to your paging receivers. The Paging Control Protocols, defined in this handbook and detailed in
the appendices, allow you or others to develop software or devices to directly control the paging encoder.
