Wavin Tempower Control Manual
Wavin Tempower Control
Heating and Cooling systems
.
Wavin Tempower Control Manual
Wavin Tempower Control
Heating and Cooling systems
.
29
7
7..3
3 P
Prro
og
grra
am
m 3
3
Seven rooms can be separately temperature
controlled with DRT-200.
Each DRT-200 has an own address.
The default is N
°
1.
Additional dew point sensor may be also used on
the first five control circuits.
Last two outputs (N¡ 19,20) control the
motorized zone valves of heating and cooling
system ( 230V ! )
According to the factory default settings the
outputs of from M1 to M7 are used for actuators
of controlled circuit, and M8 is for control pump!
This defaults can be changed for:
a) add more actuators to one room thermostat
b) add 1 or more dehumidifier to the controlled
circuit
c) control pump. This output can supply 230V in
every case when the WTC-3 receiving
heating/cooling demands from the room
thermostats.
Output terminal strip points of control circuits out
of use must be left unconnected.
Let the analogue thermostat inputs free (N¡ 21-
30)
Economy mode can be activated by the input of
C/E (31-32) or by DRT-200 room thermostat or by
the communication channel.
Heating/Cooling change over can be controlled
by H/C input (40-41) or by Master DRT-200
room thermostat or by the communication
channel.
Mixing valve control: controlled inlet water
temperature may be set with the use of the
analogous output (0-10V) as well as of "Temp"
input. Factory default for cooling is 15
°
C, and
45
°
C for heating. If control is not required, the
terminal strip points of the analogues output and
of the measuring input must be left unconnected.
Possible to add more controlled outputs to one
room thermostat via the configuration program.
7.3.1.
Configuration switch
Switch 1 = ON
Switch 2 = OFF
Switch 3 = ON
Switch 4 = ON
Design Manual
Heating and Cooling systems
Design Manual
Heating and Cooling systems
Design Manual
Heating and Cooling systems
Design Manual
Heating and Cooling systems
Design Manual
Heating and Cooling systems
Design Manual
Heating and Cooling systems
Design Manual
Heating and Cooling systems
Design Manual
Heating and Cooling systems
Design Manual
Heating and Cooling systems
Design Manual
Heating and Cooling systems
Design Manual
Heating and Cooling systems
