photo 10
photo 6
photo 7
photo 8
photo 9
photo 10
photo 11
STEP 4
Now take the bench leg assemblies from step 2 and place them on the seat. Align with the outside edges of
the 2x2
’
s. Attach with two
2”
screws on each end. (See photos 6 & 7.)
STEP 5
Fold the center leg down and attach to the bench bottom. Put one
2”
screw in the predrilled hole in the
center of the bench bottom and screw up into the leg. (See photo 8.) Now put the 2 base assemblies
together and fasten with four
2”
screws. (See photo 9.)
STEP 6
Place the table top on the base and latch down into the 4 corners between the 2x2 braces. (See photo 10.)
Put one
2”
screw into each 2x2 and screw into the top of the legs. (See photo 11.)
