From here, the ETM will sign on again with the new details given. You’d do this at the end of
a route each time.
Driver Sign Off:
Next is Driver Sign Off. If you press this button, a popup will appear confirming if you want to
sign off or not. If you press
ENTER
, you’ll be signed off and returned to the post-boot up
screen. If you do not want to sign off, press
C
to cancel.
Driver Break:
Second to last is Driver Break, you can click this if you need to go for a break or just to lock
the ETM. If clicked, you’ll need to re input your
PIN
again to unlock, which is
2361
, or if you
want to sign off completely, press
C
to be brought to the post-boot up screen.
Curtailment:
Finally, is curtailment, you can click this button and a curtailment ticket will print out for the
passenger.
Drivers Functions Menu N:
To enter the next submenu, click
Drivers Functions Menu N
to enter.
There are again, 4 submenus of this screen.
Inspector
,
Paper Status
,
Driver Settings
, and
Driver Totals
.
Inspector:
To print out an Inspector ticket, you’d ask for their digits, and type them in and then press the
Inspector button. A ticket will print out, and a popup will appear saying “Retrieving data From
RTD'', this will auto disappear in 5 seconds, or you can press the Inspectors button again, or
C
to remove the popup.
Paper Status:
Every time you print a ticket out, this number will decrease by 1. Once clicked, a popup will
appear, you can press the Paper Status button again to remove the popup, press
C
, or wait
again, 5 seconds for it to auto remove itself.
