Press " " and " " to preset your desired humidity level. The humidity is
adjustable betwee
n 4
0%RH-
8
0%RH in 5%RH increment. The default humidity is
4
0%RH.
When the humidity reaches the setting, the compressor stops and the "ECO" LED
lights up.
“ ” MODE Setting:
Press “ ”to switch the working modes as follows: Press “ ” to switch the
working mode among DRY, CONTINUOUS and FAN mode. When the mode is set, the
corresponding mode indicator light will turn on.
“ ” Timer Setting:
Press “ ” button to set a timer:
(
1
) I
n the standby state, press the timing button to set a timer to automatically start the
machine. The timing light will turn on, and the display will initially show the timing at
01. Press “ ” and “ ” to adjust the timer. In the timing process, you can press
the timing button again to cancel it.
(
2
) I
n the power-on state, press the timing button to set a timer to automatically shut
down the machine. The clear display will show the timing at 01. Now, press the “ ”
or “ ” button to adjust the timer.
(
3
)
The timing range is 01-2
4
h.
(4) P
ress and hold the timer button for 3 seconds to turn o
ff t
he front display
“ ” Swing Setting:
Press the “ ” swing button and the swing light will turn on. The fan blades will
move up and dow
n 4
0~
8
0 degrees. Press the button again to stop the blades
immediately.
“ ” Lock Setting:
In power-on state, press and hold the Lock button to lock the machine. The
indicator will light up. Then you can press and hold the Lock button again to unlock
the button.
OPERATION INSTRUCTIONS
- 0 7 -
