5. Empty The Water Tank
Two ways are available to remove the collected water.
Use The Water Tank
When the water tank is already full, the WATER FULL indicator will light up,
the dehumidifier will automatically shut down until the tank has been
emptied and placed back to the unit.
Door
Water Tank
Open the door
Take the water tank out from the
bottom
Empty the water tank
Put the water tank back in place,
and close the door, the WATER
FULL indicator will go out.
Note:
If the water tank is dirty, just use cold water or warm water to clean it. Do not use
detergent, steel wool, chemically treated dust cloth, gasoline, benzene, thinner
or other solvents. Otherwise, it may damage the water tank and cause it to leak.
Ways to Empty the Water Tank
