4
Producent kajaków i łodzi
składanych
06-500 Mława, Parcele Łomskie 15 tel / fax (+48) (0) 23 654 44 06, 509793269
www.wayland.com.pl
e-mail:
kajak@hot.pl
Rear floor keel ST1 must be prepared analogously.
So prepared keels (front and rear) place along the hull properly in direction of bow and stern.
Mount ribs W1 and W2 onto the front floor keel by placing snap fittings L1 riveted on them on the suitable
hooks riveted on the keel (p. fot.6) Ribs are supplied with numbers compatible to the numbers on keel.
Analogously ribs 6 and 7 attach to the rear floor keel (p. fot.7)
Side ladders left / right must be now attached to the floor keels front and rear. Place the bracket located on the
end of each ladder into the proper chink on the alu slings ZDB2 riveted on the stem (
blue
) and stern (
red
). Now
join side ladders to the ribs by use of special snap fittings riveted on the ribs and corresponding hooks Zac2 on
the ladders (see fot. 8, 9, 10, 11).
