6
Producent kajaków i łodzi
składanych
06-500 Mława, Parcele Łomskie 15 tel / fax (+48) (0) 23 654 44 06, 509793269
www.wayland.com.pl
e-mail:
kajak@hot.pl
Now it is necessary to continue pressing onto the floor until the side ladders are joined the same way. Insert
wooden block riveted on the rear side ladder into the clamp on front ladder and push it outside do the same with
remaining side ladder (see fot. 15, 16)
Attach bottom central poles front and rear WDSP2 i WDST2. Insert their metal ends in the bushes on front and
rear poles already attached to the stern and stem. Now join them in the central part by use of movable bushes
with grooves fixed on the front central poles. (see fot. 17)
Assemble
ribs W3, W4, W5 in proper places signed 3,4,5 on the keel central part. Ribs need to be joined by
use of snap fittings on the corresponding hooks riveted on the keel. Same way assemble ribs to the side ladders
Bottom poles place in rubber pole seats riveted on ribs ( see fot. 18) (see fot 19, 20)
