Please charge the device for more than 1 hour by AC adapter when you use the device for the first time.
Please charge the device in time when low battery or battery depletion. Please keep the device in a cool and dry
place with more than half of battery capacity when not use the device for a long time.
1.4 Charging by Car Charger
Caution: To protect your device against suddenness, please connect the car charger only after the car engine has
been started.
1.5 USB Cable
The USB cable is provided for data transmission , This USB cable will work on the PC either with Microsoft Active
Sync® or as a mess storage media. You can select the mode in the “Setting-USB” menu.
1.6 Install the Car Cradle and Bracket
Take off the protection film on the bottom of the suction. Then put the bracket onto a suitable location of your
windscreen or side window and make sure the suction or windscreen is clean without water or any dirty things .
Never place the stand where the driver's field of vision is blocked.
Main Functions Introduction
1. Starting Up and Power Off
Long press the “Power” button to power the equipment on and you can see the main interface as below :
Long press the “Power” button again to enter into the below interface .
Tap the “
Power off”
button to turn the unit off.
Tap the
“Sleep”
button to enter a suspend state and the system stops operation.
