4. Getting started – Digital TV (DVB-T)
Switch on the device by setting the ON/OFF switch to the
ON position. The main menu will appear. There are six
functions are available: [HD TV], [MOVIE], [MUSIC],
[PHOTO], [PVR] and [SETUP]. Select the functions by the
arrow keys and confirm by the OK key. If installation for
the first time, when you select HD TV function and confirm
by the OK key, the following installation guide will appear.
Note:
Insure that you are in an area where DVB-T services are available.
Connect the provided antenna to the device before searching channels properly
and tightly.
Otherwise, you will not receive any DTV channels.
For a better reception of DVB-T signals, please keep the antenna far away from this
device, and draw the antenna to a metal surface of non-electronics devices.
Select the desired On Screen Display language under
the field “OSD”. For English, select “English” by
pressing the
or
keys.
Press the
key to select “Country” menu.
Select the country in which the device is to be used
under the field “Country”. For England, select
“England” by pressing the
or
keys, and press the
key to select “Channel
search” menu.
If you wish to receive the DVB-T channels, press the OK or keys to confirm under
the field “Channel search”, it will automatically search for DVB-T channels in your
area. Press the MENU key to skip and save.
If not, press the EXIT key to return to the main menu.
Note:
If no DVB-T channels found, or you want to re-search the channels, please open the
[MENU TV] menu as the following steps:
a If under TV Mode, please press the MENU key on the remote control to open
the [MENU TV] menu,
b Under the Main Menu mode, please select the [SETUP] menu and confirm by
the OK key. Select [MENU TV] menu by the
or
Use the
keys to select the desired function, the OK or keys to confirm, and the
EXIT key to exit to the up-menu.
