NOTICE
USING YOUR NAVIGATOR at the first time
1. Charge completely
2. Install into your vehicle
3. Initialize software as described in the manual
4. Make sure that the car is outside the garage and it is not
covered by anything (treed, bridges, etc)
5. Normally it takes a bit longer to receive the GPS signal the first
time you turn on the unit. Your device has to locate 3 satellites
to function. This time to find the satellites is significantly
shorter after the first time you use the device. If you move your
unit over 300km without it being used, it may need a little more
time to locate the satellites again.
2