9
mainframe short circuited.
2.2 Power off
Press the button on the top of the unit to turn off,
the unit will enter the power saving mode and
maintain the last operation status when boot next time.
3. Reset system
◆
If the system cannot work, you can reset the system
by the following way:
◆
Click the reset key on the right part of the machine to
reset the system by using the stylus.
【
relative information
】
: it can be no response in the
following condition:
◆
The shift between pictures is delayed or stopped.
◆
The program select function cannot work normally,
such as long time to carry out or cannot be activated.
◆
The power button can not work
Summary of Contents for xRIDER
