System setting
Digital Video Recorder(DVR)
User Manual
Issue V1.0 (2018-06-04)
43
Figure 6-6
Ipv4 setting screen
Step 2
Click
next to
Obtain IP automatically
to enable or disable the function of
automatically getting an IP address. The function is enabled by default.
If the function is disabled, click input boxes next to
IP
,
Netmask
, and
Gateway
to set
the parameters as required.
Step 3
Click
next to
Obtain DNS Automatically
to enable or disable the function of
automatically getting a DNS address. The function is enabled by default.
If the function is disabled, click input boxes next to
DNS1
and
DNS2
, delete
original addresses, and enter new addresses.
Step 4
Click
Check
. The system automatically checks network settings and the dialog box as
shown in Figure 6-7 is displayed. Check and connect the network based on network
check results.
Summary of Contents for 0E-HD4C1TB
Page 2: ......
